What is Netlify Dev?

Watch the introduction (24 minutes)

Netlify Dev brings the power of Netlify's Edge Logic layer, serverless functions and add-on ecosystem to your local machine. It runs Netlify's production routing engine in a local dev server to make all redirects, proxy rules, function routes or add-on routes available locally and injects the correct environment variables from your site environment, installed add-ons or your netlify.toml file into your build and function environment.

                            ┌───────────────┐
                            │   Project     │
                            │               │
                            └localhost:5000─┘
                                    │
                                    │
       ┌──────────┐                 │
       │  Addons  ├────┐            ▼
       └──────────┘    │    ┌localhost:5000─┐     ┌──────────────┐
       ┌──────────┐    └───▶│               │     │              │
       │functions ├────────▶│    Netlify    │     │   Browser    │
       └──────────┘    ┌───▶│      Dev      │     │              │
       ┌──────────┐    │    │               │     │              │
       │_redirects│────┘    └──localhost:8888───▶ localhost:8888─┘
       └──────────┘

With project detectors, it automatically detects common tools like Gatsby, Hugo, React Static, Eleventy, and more, to give a zero config setup for your local dev server and can help scaffolding new functions as you work on them. Read our blogpost for more on detectors and how you can contribute!

Prerequisites

• You should have the latest Netlify CLI version. Run npm install -g netlify-cli to be sure.
• You should be logged in on Netlify CLI
• Your project should be linked to a siteID on Netlify (using netlify init or netlify link). You can confirm this has been done if you have a .netlify folder with a state.json file containing your siteID.

This is how we pull down your build environment variables and manage your addons on your local machine.

Usage

• netlify dev start a local dev server for the build tool you're using
• netlify dev:exec <command> runs a shell command within the netlify dev environment
• netlify functions:create bootstrap a new function

## ~/.zshrc
alias ndeploy="netlify deploy --prod"
alias nd="netlify dev"
alias ndl="netlify dev --live"
alias nfc="netlify functions:create"
alias ndx="netlify dev:exec "

Netlify Dev usage

USAGE
  $ netlify dev

OPTIONS
  -c, --command=command      command to run
  -f, --functions=functions  Specify a functions folder to serve
  -o, --offline              disables any features that require network access
  -p, --port=port            Specify port of netlify dev
  -l, --live                 Start a public live session

DESCRIPTION
  The dev command will run a local dev server with Netlify's Edge Logic proxies and redirects, serverless functions, and addons

EXAMPLES
  $ netlify dev
  $ netlify dev -c "yarn start"
  $ netlify dev -c hugo

COMMANDS
  dev:exec  Exec command

Live Share

To share your ongoing dev session with a coworker, just run Netlify Dev with a --live flag:

netlify dev --live

You will get a URL that looks like https://clever-cray-2aa156-6639f3.netlify.live/. This can be accessed by anyone as long as you keep your session open.

Note: there are currently known issues with ending the live session alongside your webdevserver, as well as with live reloading. We are working on fixing it, and would appreciate repro cases, or you may check existing issues with the --live tag. In the mean time you can run ps aux | grep live-tunnel and kill these sessions manually.

netlify.toml [dev] block

Netlify Dev is meant to work with zero config for the majority of users, by using its detector system. However you may wish to assert more control over its behavior, and should make use of the new [dev] block in netlify.toml to do so:

# sample netlify.toml
[build]
  command = "yarn run build"
  functions = "functions" # netlify dev uses this to know where to scaffold and serve your functions
  publish = "dist"

# note: each of these fields are OPTIONAL
[dev]
  command = "yarn start" # Command to start your dev server
  port = 3000 # Port that the dev server will be listening on
  functionsPort = 34567 # port for functions server
  publish = "dist" # If you use a _redirect file, provide the path to your static content folder

Project detection

Netlify Dev will attempt to detect the SSG or build command that you are using, and run these on your behalf, while adding other development utilities. If you have a JavaScript project, it looks for the best package.json script to run for you, using simple heuristics, so you can use the full flexibility of npm scripts. We may add more intelligence to this in future.

Overriding the detectors: The number of project types which Netlify Dev can detect is growing, but if yours is not yet supported (contributions welcome!), you can instruct Netlify Dev to run the project on your behalf by declaring it in a [dev] block of your netlify.toml file.

# sample dev block in the toml
# note: each of these fields are OPTIONAL and should only be used if you need an override
[dev]
  command = "yarn start" # Command to start your dev server
  port = 3000 # Port that the dev server will be listening on
  functionsPort = 34567 # port for functions server
  publish = "dist" # If you use a _redirect file, provide the path to your static content folder

   ┌──────────────────────────────────────────────────────────────┐
   │                                                              │
   │   [Netlify Dev] Server now ready on http://localhost:64939   │
   │                                                              │
   └──────────────────────────────────────────────────────────────┘

Redirects

Netlify Dev has the ability emulate the redirect capability Netlify provide on the ADN in your local environment. The same redirect rules which you configure to run on the edge, will also work in your local builds.

Netlify dev supports redirect rules defined in either _redirects or netlify.toml files.

The order of precedence for applying redirect rules is:

1. _redirects file (in the project's publish folder)
2. netlify.toml file (in the project's publish folder)
3. netlify.toml file (in the project's root folder)

See the Redirects Documentation for more information on Netlify's redirect and proxying capabilities.

Netlify Functions

Netlify can also create serverless functions for you locally as part of Netlify Functions. The serverless functions can then be run by Netlify Dev in the same way that wold be when deployed to the cloud.

## list of major functionality
netlify functions:list
netlify functions:create
netlify functions:invoke

A number of function templates are available to get you started, and you can add your own utility functions to suit your own project development needs. You can also locally invoke them with test payload data.

Create a new function

$ netlify functions:create

Important note: Your functions will likely have node_modules in each folder. These are usually gitignored. You can write bash scripts to install them for production, or use the lightweight netlify-lambda install CLI to do it for you.

# Create a new function from one of the
# available templates offered when prompted (see below)
$ netlify functions:create

# alternatives
$ netlify functions:create hello-world # Create a new function with a given name
$ netlify functions:create --name hello-world # same

# Create a new function by cloning a template from a remote url
# organised with dependencies installed into a subdirectory
$ netlify functions:create hello-world --url https://github.com/netlify-labs/all-the-functions/tree/master/functions/9-using-middleware

// .netlify-function-template.js
module.exports = {
  addons: [
    {
      addonName: "fauna",
      addonDidInstall: () => {} // post install function to run after installing addon, eg. for setting up schema
    }
  ],
  onComplete() {
    console.log(`custom-template function created from template!`);
  }
};

Locally Testing Functions with netlify functions:invoke

netlify functions:invoke allows you to locally test functions going above and beyond a simple GET request in browser. (we only model POSTs now but could easily expand from here).

If you have Netlify Dev running your functions, you can then test sending payloads of data, or authentication payloads:

# with prompting
netlify functions:invoke # we will prompt you at each step
netlify functions:invoke myfunction # invoke a specific function
netlify functions:invoke --name myfunction # invoke a specific function

# no prompting (good for CI)
netlify functions:invoke --name myfunction --identity # invoke a specific function with netlify identity headers
netlify functions:invoke --name myfunction --no-identity # invoke a specific function without netlify identity headers

# sending payloads
netlify functions:invoke myfunction --payload '{"foo": 1}'
netlify functions:invoke myfunction --querystring "foo=1"
netlify functions:invoke myfunction --payload "./pathTo.json"

There are special cases for event triggered functions (eg identity-signup) which will also give you mock data for testing. This makes manual local testing of event triggered functions possible, which drastically improves the development experience.

This is a new feature; ideas and feedback and issues and PR's welcome!

Function Builders, Function Builder Detection, and Relationship with netlify-lambda

Existing users of netlify-lambda should have no change to their workflow by switching to netlify dev. One immediate benefit is no need for proxying since Netlify Dev does that for you.

Why Function Builders

Notice that all the functions created by netlify functions:create require no build step. This is intentional: we want to remain agnostic of build tooling and thereby create clear expectations: You give us a folder of functions, and we simply serve it (This is called zip-it-and-ship-it). If you want to build that folder from a separate source folder, that is entirely under your control. Use whatever tool you like.

This can be helpful, for example, to use ES modules syntax (e.g. import/export) via webpack, babel transforms via babel-cli or babel-loader, or strict type-checking and transpilation with TypeScript's tsc or other webpack loaders.

We'll call this category of tools function builders. In fact, we do maintain an open source function builder dedicated to the task of transforming serverless functions from source to destination via webpack, called netlify-lambda. We maintain a comparison between Netlify Dev and netlify-lambda on its README as well as advice on when to use which or both.

Function Builder Detection

We don't expect everyone to use function builders, but we expect many will, and want to provide helpful defaults that "just work" for this. To do that, we use a similar detection concept to project detectors, and look for common function builder setups.

With this feature, pre-Netlify Dev projects like https://github.com/netlify/create-react-app-lambda can immediately use the netlify dev command with no change to code. Currently, we only offer detection for scripts with netlify-lambda build $SRCFOLDER. More ideas are welcome.

Netlify Dev will watch netlify-lambda's source folder and rebuild whenever the source file changes, eliminating the need for netlify-lambda serve since we dont want a duplicate functions server.

Bring Your Own Function Builder

We may offer detection for more function builders in future, and also let you specify function build commands in the netlify.toml [dev] block. Please share your usecase with us if you are likely to need this.

Using Add-ons

Add-ons are a way for Netlify users to extend the functionality of their Jamstack site/app.

Check out Add-on docs here.

To try out an add-on with Netlify dev, run the netlify addons:create command:

netlify addons:create fauna

The above command will install the FaunaDB add-on and provision a noSQL database for your site to leverage. The FaunaDB add-on injects environment variables into your site's build process and the serverless functions.

Or install this one click example.

After you have installed an add-on, it will be visible with the netlify addons:list command inside your site's current working directory. You can use netlify addons:delete $ADDONNAME to delete your addon instance.

For now, it is important to include instructions to create addons for each member of your team, as there is no way to specify addons inside of netlify.toml. We are working on this.

Contributing/Local Development

Thanks for contributing! You'll need to follow these steps to run Netlify CLI and netlify-dev-plugin locally:

1. uninstall any globally installed versions of netlify-cli
2. clone and install deps for https://github.com/netlify/cli
3. npm link from inside the cli folder
4. clone and install deps for this repo
5. inside the netlify-dev-plugin folder, run yarn link
6. inside the cli folder, run yarn link "netlify-dev-plugin"

Now you're both ready to start testing netlify dev and to contribute to the project! Note these are untested instructions, please get in touch if you're unable to follow them clearly and we'll work with you. Or ping @swyx.

Note that code that you may be debugging or investigating may be in some transitive dependencies we have published as separate libraries:

• https://github.com/netlify/netlify-rules-proxy/ (npm)

• https://github.com/netlify/node-redirects-parser (npm)

• (not open source) https://www.npmjs.com/package/netlify-redirector